REPA Conveyor Equipment b.v.



Webdesign en CMS door Orangeline b.v.

REPA Conveyor Equipment
Fluorietweg 28, 1812 RR Alkmaar
E-mail: 		Tel. +31 (0)251-700252
Fax +31 (0)251-311046
HDPE idlers type RQ+

The RQ+ roller of Repa Conveyor Equipment sets a new standard in the world of HDPE rollers. There are many benefits to this HDPE roller,compared to steel rollers.
  • HDPE rollers save energy because it is approximately 50% lower in weight.
  • Resistant to many chemicals.
  • Corrosion resistant.
  • Extremely durable.
  • The RQ+ roller of Repa CE has an antistatic bearing house and HDPE tube.
  • About 25% less noise compared to steel rollers.
  • The HDPE tube is totally immune of dirt sticking to it.

Repa Conveyor Equipment has its own test environment. Our RQ+ roller has also been tested in this environment.

The dust test:

In this setup, the dust test is performed on our RQ+ roller.  After 200 hours non-stop running, there was absolutely no dust detected in the grease of the bearing.
The water test:
During the water test, we let the RQ+ roller run for 72 hours continuously while water was sprayed on the sealing. After those 72 hours, there was absolutely no water in the labyrinth sealing and the HDPE tube.
The rolling resistance:

Also, the rolling resistance of the RQ+roller is measured. This is done at a speed of 600 rev /min with a radial load of250N.The measured rolling resistance was only 0.96N.
RQ+ idler HDPE.
The HDPE idler of Repa Conveyor Equipment type RQ+