REPA Conveyorequipment CEMA idlers type HQ of Repa Conveyor Equipment

HQ idler (CEMA standard)

The HQ roller of Repa Conveyor Equipment is specially designed for all your high demanding installations. Before we weld the bearing houses in the tube, we standardly first machine the chambers in the tube,. This results in a perfect lining of the bearings and in excellent concentricity properties.

We also paid a lot of attention to the sealing of the roller. The use of a back seal guarantees a very long operational life.

All the standards (DIN, CEMA and AFNOR) are available by Repa Conveyor equipment

CEMA	C4	Shaft	Ø20
	C4	Tube	Ø4” (Ø 101,6)
	C5	Shaft	Ø20
	C5	Tube	Ø5” (Ø 127)
	D5	Shaft	Ø25
	D5	Tube	Ø5” (Ø 127)
	D6	Shaft	Ø25
	D6	Tube	Ø6” (Ø 152)
	E6	Shaft	Ø40
	E6	Tube	Ø6” (Ø 152)
	E7	Shaft	Ø40
	E7	Tube	Ø7” (Ø 177,8)
Belt width	Article Repa	RL (roller length)
Belt width	Article Repa	Inch	mm
24"	Trough idler	9 1/2"	240
24"	Return idler	27 1/8"	690
30"	Trough idler	11 3/8"	290
30"	Return idler	33 1/8"	840
36"	Trough idler	13 3/8"	340
36"	Return idler	39 1/8"	990
42"	Trough idler	15 3/8"	390
42"	Return idler	45 1/8"	1150
48"	Trough idler	17 3/4"	440
48"	Return idler	51 1/8"	1300
54"	Trough idler	19 3/4"	490
54"	Return idler	57 1/8"	1450
60"	Trough idler	22"	560
60"	Return idler	63 1/8"	1600
66"	Trough idler	24"	610
66"	Return idler	69"	1750
72”	Trough idler	26"	660
72”	Return idler	75 1/8"	1900
84”	Trough idler	30 1/8"	765
84”	Return idler	83 1/8"	2100
96”	Trough idler	34 1/4"	870
96”	Return idler	99"	2510