CE-TRACK-ADJ.
The CE-TRACK-ADJ is an adjustable , 3-part belt tracker with some unique features.
- Standard applicable at 2 directions.
- The rollers are standard produced with an hot vulcanized rubber coating for optimum belt grip. The rubber coating also minimizes adhesion of dirt.
- By making use of tapered wing rollers the frame it reacts immediately to a displacement of the belt.
- Adjustable through angle from 5 ° till 45 ° in 5° steps.
- Adjustable length of the lower beam.
- Adjustable height of the idler.

The CE-TRACK-ADJ according to DIN or CEMA is available for belt wide:
BW0650
BW0800
BW1000
BW1200
BW1400
CE-TRACK.
The CE-TRACK is a self aligning conveyor belt tracking system. The CE-TRACK has some unique features.
- By default suitable for 2 belt directions.
- The surface of the rollers has by default a hot vulcanized rubber lagging for a perfect grip on the belt. The rubber lagging is also ensures also a minimal adhesion of dirt on the rollers.
- The CE-TRACK will react immediately on a belt displacement because of the conical side rollers.
![]() |
![]() ![]() |
BW0650
BW0800
BW1000
BW1200
BW1400